Focus on Wireless
Featured articles from Digi-Key Electronics
Wireless technology is now a very important part of the overall electronics scene. There is an enormous variety of wireless technologies from the familiar Bluetooth and Wi-Fi to the more specific standards like LoRa, SigFox, Zigbee and many more. Each wireless standard has its place within the wireless ecosystem and there are modules and different platforms for them. Find out more about these technologies and how you can use them in the Digi-Key Focus on Wireless.
Antennas are a key link in any radio system. Laird's CFD69383P and CFD69383P1 are low PIM, 2-port MIMO indoor wideband omnidirectional low-profile ceiling mount antennas. They are designed to provide pattern coverage that is optimised for indoor coverage requirements at 698 MHz to 960 MHz and 1690 MHz to 4000 MHz for the LTE, AWS-3, WCS, and CBRS/WiMAX frequency bands.Read more
Many of the applications for the wireless control of systems like lighting, heating, ventilation etc use the 2.4 GHz ISM band. This has many advantages, but one big issue is that of range - at 2.4 GHz significant amounts of the signal are absorbed by walls and other fittings etc. This is a feature of using these frequencies. Using standards like Zigbee and Bluetooth, etc, there are ways of overcoming this fundamental issue and providing good reliable wireless connectivity. Read more . . .Read more
Designers have a wide variety of wireless technologies to connect a product to the Internet of Things (IoT). Each technology suits different applications, requiring designers to carefully consider factors such as range and data rate, cost, power consumption, volume, and form factor.
LoRa (Long Range) is one protocol that has some distinct advantages (as the name indicates) for long range low data rate connectivity and it is gaining a significant amount of interest and traction. Read more . . .Read more
Licence free wireless standards make great use of both the 2.4 and 5 GHz bands. However, for industrial and more mission critical applications, there are performance and interference requirements and characteristics that need to be given serious consideration before choosing which band to use. Find out how to make the best choice.Read more
Air quality is a key concern to organizations like the World Health Organization (WHO), which links pollutants like particulate matter, ozone, and nitrogen oxides (NOx) with diseases and increased rates of early mortality. Air pollution is one of 10 environmental factors included by the WHO in its assessment of global disease burden. Even cities like London and many others are struggling to keep levels of pollutants don to acceptable levels. One key tool in the fight against rising levels is to use remote sensors in monitoring the levels. Find out more about the available ICs and sensors that can be used.Read more
Bluetooth Low Energy, BLE, is an excellent wireless standard for many IoT and IIoT applications. As the Industrial Internet of Things, IIoT relies heavily on sensors to collect data from a portable, wearable system to monitor movement, pressure, humidity and many other characteristics that are then fed back to the cloud for processing, BLE will be widely used as it has been designed for this type of application.
To enable sensors to be designed quickly and to have reliable operation, BLE modules provide an ideal basis for any design. BLE transceivers have reduced in size with chip scale packaging, making them small enough to easily fit alongside the various sensors in an IIoT design. Find out more . . .Read more
Antennas are a particularly important element of any radio system. Their performance can govern that of the whole system. However, choosing an antenna can be a difficult task, there are several parameters that need to be taken into consideration. It is imperative to examine several physical, electrical, and economical options to find the perfect antenna for a given application. While this is not a “one size fits all” topic, and much of this may be rudimentary for the RF engineer, hopefully this will shed light on many factors that need to be considered when choosing an antenna.Read more
For many applications, cost is a top priority driver. In some applications like the Internet of Things where low cost sensors and remote nodes are needed, cost can sometimes be more important than low power consumption. Improvements in silicon technology have lowered power consumption to where it has become viable for battery-powered wireless sensor nodes. These take advantage of sub-GHz unregulated radio bands for long-range connections that can be more cost effective than the regulated cellular bands.Read more
Wi-Fi is one of the major technologies being used for wireless connectivity. It is now becoming a key wireless bearer standard for many Internet of Things (IoT) devices. As a result it is a favourite target for hackers. Weak security implementations leave devices open to penetration during ongoing network communications. Worse, IoT devices can fall victim to attack early in their lifecycle when the device attempts to join trusted networks. Find out how to improve security and protect against hacking . . .Read more
For any radio system the antenna is a key element in the overall line. Its performance can determine that of the whole system. Designers of handheld and portable wireless products such as smartphones and wearables rely on tiny chip, patch and trace antennas that can be placed within the device. While these miniature devices solve the problem of bringing multiband antenna arrays to small form factor systems, they also introduce issues related to reduced radiation efficiency, impedance matching, and interaction with nearby objects and bodies.Read more
There are two major bands used for wireless LANs / Wi-Fi 802.11: 2.4 and 5 GHz. For consumer devices the choice between the two bands is normally automatically made by the device using the WLAN dependent upon its capabilities and the operating conditions. However for industrial and more mission critical applications more consideration needs to be given to the choice of band.
Find out more about the differences between 2.45 and 5 GHz WLAN operation, and see the advantages of designing industrial wireless devices using 5 GHz WLANs compared with 2.45 GHz systems together with some of the design tools available. A must read for anyone in this sectorRead more
The antenna design is probably the most overlooked elements of any product involving RF. Often antenna design is seen as a black art, but this is not so. Find out some of the basics of antenna design so you can make the most of any product involving wireless communications.Read more
We have recently seen how major companies have been hacked and held to ransom by hackers. This is a growing trend which is set to only get worse. It demonstrates the absolute need for security. The demonstrated ability of hackers to penetrate IoT devices says more about the level of security of these devices than the skill of the hackers: in most cases, the affected products lack the most basic security provisions. When designing devices fort he IoT security needs to be built in from the beginning and many development kits now enable excellent security to be built in tot he final product.Read more
Power is critical in IoT devices. In many wireless Internet of Things devices such as wearable electronics and battery-powered or self-powered sensors, keeping power consumption to a minimum is key. Some of the most important applications for the IoT include the smart home, remote healthcare, consumer retail, environmental monitoring and commercial asset tracking. To simplify deployment, these devices need to be easy for the intended end user to access and control without special equipment such as dedicated gateways. Find out how this can be done.Read more
Many different skills are needed when designing Internet connected products - embedded software, hardware design and construction, packaging, security, and remote control. This can all be challenging and time consuming. To ensure the best chance of getting high quality and properly functional products to market in a timely fashion, development teams require a way to jumpstart their development and minimize what they need to do in a typical design cycle in order to meet cost and time-to-market requirements. Find out how this can be done . . .Read more
Bluetooth is one of the main wireless standards and it is being widely used in IoT applications. Bluetooth-enabled IoT devices provide ready access to data through smartphones and other gateway devices. Still, the design of low-power, battery-operated IoT solutions remains challenging in terms of both wireless sensing as well as optimisation of power-draining communications subsystems. For designers with ever tightening time-to-market windows, the design task needs to be simplified. Find out some routes to improve your time to market . . .Read more
One of the current key technology motivators is that of autonomous vehicles and development is moving forwards at a rapid rate. This is reflecting into current vehicle technology as well. The development of driverless cars is highlighting the need for robust, low latency wireless communications to provide a vast range of functions. There are two different approaches being proposed to address this need, 802.11p and C-V2X:PC5. Wireless communication can be used from vehicle to infrastructure (V2I), vehicle to vehicle (V2V) and vehicle to pedestrian (V2P), all combined as V2X. Find out all about these standards . . .Read more
In any radio or wireless related item it is the antenna that is probably the most overlooked part of an RF design. However its performance is key to the operation of the whole system. Range, performance, and legality of an RF link are critically dependent upon it. Regardless, antenna selection is often left until the end of the design, at which point optimal antenna performance may not be achievable within the space provided. Find out some of te key points about antennas to help you . . .Read more
Bluetooth 4.1, 4.2 and 5 Compatible Bluetooth Low Energy SoCs and Tools Meet IoT Challenges (Part 1)
Bluetooth is one of the most widely deployed wireless standards. Recently there have been significant upgrades to the Bluetooth low energy RF protocol software (“stack”) adopted in versions 4.1, 4.2 and 5 of the standard. These changes have dramatically improved its practicality for a wide range of applications beyond its consumer roots, particularly those related to the Internet of Things (IoT). Find out how to use it . .Read more
Wireless fitness devices are now commonplace and their use is increasing rapidly. To meet the demands for the wireless connections, there are many different options that can be used. Fitness bands aimed at the consumer are using the latest versions of Bluetooth Low Energy connecting to a smartphone, but there are many other ways to provide connectivity to a fitness band that also acts as a wireless patient monitor. Read about some practical key insights . . . .Read more
Development speed is key in today's electronics industry. faster time to market means development costs are reduced and products hit the market as soon as possible, and they can be ahead of the competition. The market for IoT devices is increasing - there is hardly an embedded device used in our homes, offices and factories that doesn’t have some form of wireless communication. There is no doubt that the Internet of Things (IoT) and the industrial form of it, the IIoT, are responsible for the surge in connectivity; but the foundations of this ubiquitous wireless environment are solidly based around the advent of smartphones and their apps. To meet these needs fast tracking design is essential - find out how you can achieve this.Read more