18 Jun 2018

Host-controlled interface Bluetooth RF module

Panasonic Industry Europe is releasing a new Host-Controlled Interface (HCI) Bluetooth RF module offering increased BLE data transfer rates by factor 2,5 than previous Bluetooth low energy solutions.

The PAN1326C module is Bluetooth-4.2-compliant and benefits from a tiny footprint of only 85.5mm² (9.0mm x 9.5mm x 1.8mm (width x length x height).

Next to the UART interface the PAN1326C comes with a audio/voice codec interface which is a fully-dedicated programmable serial port that provides the logic to interface to several kinds of PCM or I2S codec’s. The wide operating temperature range is -40°C up to +85°C and the supply voltage range is 1.8V up to 4.8V.

Comments Pascal Meier, Product Manager at Panasonic: “Our new PAN1326C Host-Controlled Interface (HCI) Bluetooth RF module brings Texas Instruments’ third generation Bluetooth core integrated circuit, the CC2564C, to an easy-to-use module format. It is even 100 % pin-compatible with previous generations of Texas Instruments-based Bluetooth HCI modules”.

Most popular news in Wireless technology

Is LoRa answer for IoT & M2M wireless communications?
Concurrent dual-channel chip for automotive V2X communications
HYDRA 1.X mmWave IP validated in successful real-world trial
Host-controlled interface Bluetooth RF module
Wireless software enables bluetooth communications with Sub-GHz IoT devices

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter






Next Generation Freight Transport Mark Patrick | mouser Electronics
Next Generation Freight Transport
As road freight transport levels continue to grow, concerns about the impact on the environment and human health come sharply into focus. Fossil fuel dependency makes it a leading source of greenhouse gas (GHG) emissions, but shifting freight to other transportation modes will prove challenging. Solutions that will improve the efficiency and performance of road freight transport are therefore essential to achieve defined environmental goals. In this blog, we will explore a potential solution that has been pioneered by Siemens - called eHighway. This combines the efficiency of electrified railways with the flexibility of trucks in order to form an innovative, next generation freight traffic system that is efficient, economical and environmentally friendly.









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy