13 Feb 2018

Validate performance of eCall modules with GNSS performance test

Approximately one year after ERA-GLONASS became mandatory for Russia and the Eurasian Customs Union, the use of its European counterpart eCall will become obligatory as of April 1, 2018. Before eCall or ERA-GLONASS modules can be integrated into cars, they need to be certified. They have to undergo a series of conformance and performance tests, which must be in line with applicable standards.

The GNSS receiver integrated into the eCall module typically evaluates signals from GPS, Galileo and satellite-based augmentation systems (SBAS) to determine the vehicle position. In an emergency, the module automatically places a call to the nearest emergency call center and transmits vehicle position data and other information via a cellular link. To make sure the accuracy of the reported position as well as a number of other performance parameters are within certain limits, the built-in GNSS receiver has to be tested against the criteria defined in the EU2017/79, Annex VI and UNECE 2016/07 specifications.

The R&S SMBV100A in combination with the new R&S SMBV-K361 option and the R&S CMWrun sequencer software is the ideal tool for performing fully automated GNSS performance tests on eCall modules in line with the EU2017/79, Annex VI and UNECE 2016/07 specifications. All test cases specified in these documents can be configured, scheduled and conducted automatically with this solution. It enables users to quickly and easily verify the positioning capabilities of their eCall modules and to tremendously simplify and accelerate the certification process.

The new R&S SMBV-K361 eCall test suite is now available from Rohde & Schwarz. With this new GNSS performance test solution for eCall modules, Rohde & Schwarz offers a complete portfolio of standard-compliant conformance and performance test solutions for both eCall and ERA-GLONASS based on the R&S CMW500 and R&S SMBV100A.

Most popular news in Test & measurement

Yokogawa launches WT5000 precision power analyzer
Evolution of Anritsu Protocol Test System supports 5G New Radio
First 5G NR network measurement solution
R&S signal and spectrum analyzer now with 5G new radio uplink
53 Gbaud upgrade released for PAM4 optical signal analysis

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter







Tick-Tock: What Your Engineers Could be Spending Time Doing if They Weren’t Stuck Designing a Display? Markku Riihonen | 4D Systems
Tick-Tock: What Your Engineers Could be Spending Time Doing if They Weren’t Stuck Designing a Display?
As soon as any design project is embarked upon, the clock starts ticking. The length of time needed to develop a system can impinge heavily on its commercial success. Windows of opportunity could be missed if it takes too long to complete, with products from rival companies gaining greater market share.









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy