09 Feb 2018
Test RF properties of WLAN stations under real-world conditions
The R&S CMW270 wireless connectivity tester is the first tester to emulate all IEEE 802.11a/b/g/n/ac standards, including 802.11ax. In signaling mode, users can test the RF properties of WLAN stations under real-world conditions.
Before now, the RF properties of WLAN stations (STA) were mainly tested in an artificial remote control operation, the non-signaling mode. For IEEE 802.11ax, this is only possible to a certain extent. IEEE 802.11ax uses OFDMA technology to significantly increase the efficiency of WLAN networks. The available bandwidth is shared between multiple STAs that simultaneously transmit to the access point. This requires precisely coordinated timing among all STAs, and power levels need to be individually controlled. The innovative IEEE 802.11ax presents new challenges for all those involved with testing WLAN components – from development to production.
Rohde & Schwarz now presents a solution based on the well-established R&S CMW270 wireless connectivity tester, which has a newly extended bandwidth of 160 MHz. Users also need the new hardware option, the R&S CMW-B100H advanced measurement unit, which allows them to emulate an 802.11ax access point to test the RF properties and performance of a STA under realistic conditions. The R&S CMW270 can also simultaneously and comprehensively test other devices, e.g. Bluetooth devices.
The solution will be available as of April 2018 from Rohde & Schwarz.
Most popular news in Test & measurementSignal analyzer software supports 5G NR analysis
First IP54 plug-and-play IIoT development kit from HARTING
Automotive radar echo generator offers reliable and future-proof testing
Compact, easy-use PC-based board tester ideal for finding PCB faults quickly
Waveform analysis helps validate characteristics of complex devices
Share this page
Want more like this? Register for our newsletter