14 Feb 2018

RS expands RS Pro range of test and measurement equipment

RS Components has launched more than 100 new test and measurement products under its RS Pro label. The new introductions include products from three key equipment ranges: oscilloscope probes and thermal imaging cameras, both of which are new product areas for RS Pro, as well as a new digital multimeter.

The RS Pro oscilloscope probes are ergonomically designed, lightweight and suitable for use with all major brands of oscilloscope. The range covers passive probes starting at 15 MHz through to active probes measuring up to 1.2 GHz. The units target general electronics applications including use in R&D and laboratories and in design and repair facilities and departments.

Two new RS Pro thermal imaging cameras deliver user-friendly controls with fast, accurate and reliable measurement, while also being robust enough to withstand daily use in a range of tough environments. The units have been designed for use by a wide range of professionals including building and facilities engineers and maintenance technicians within processing or utilities industries.

Both devices offer a 2.8-in display, approximately four hours of battery life and storage capability via a MicroSD card. The RS700 offers an operating temperature range of -20 to +150°C with an infrared resolution of 80 x 80 pixels, in addition to offering Wi-Fi connectivity; whereas the RS730 offers a temperature range of 0 to +350°C with an IR resolution of 120 x 160 pixels.

The new RS Pro HS608 MeterScope is ideal for use in the utilities, energy or processing industries, as well as in a wide range of maintenance applications. The MeterScope is a True-RMS digital multimeter with oscilloscope functions and 3.5-in colour TFT display. Featuring a 20 MHz bandwidth and 50 MS/s real-time sample rate, the MeterScope has built-in data logging and trend capturing capability, which can be transferred via Bluetooth for deeper analysis.

All three RS Pro product ranges are now shipping from RS in the EMEA and Asia Pacific regions.

Most popular news in Test & measurement

Yokogawa launches WT5000 precision power analyzer
Evolution of Anritsu Protocol Test System supports 5G New Radio
First 5G NR network measurement solution
53 Gbaud upgrade released for PAM4 optical signal analysis
R&S signal and spectrum analyzer now with 5G new radio uplink

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter







Tick-Tock: What Your Engineers Could be Spending Time Doing if They Weren’t Stuck Designing a Display? Markku Riihonen | 4D Systems
Tick-Tock: What Your Engineers Could be Spending Time Doing if They Weren’t Stuck Designing a Display?
As soon as any design project is embarked upon, the clock starts ticking. The length of time needed to develop a system can impinge heavily on its commercial success. Windows of opportunity could be missed if it takes too long to complete, with products from rival companies gaining greater market share.









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy