26 Oct 2017
Ka-band dual channel loop test translator
AtlanTecRF, a global RF and microwave components and equipment manufacturer, has launched a Ka-band version of its Dual Channel Loop Test Translator.
This new product features dual channel operation with the ability to introduce different transfer characteristics in each channel. This gives the user a lot of flexibility and means one LTT instrument can be used in a variety of test applications for frequency conversions from Uplink (Tx) to Downlink (Rx) or to L-Band and from L-Band to Downlink (Rx).
The new Ka-band unit addresses the 30GHz uplink and 20GHz downlink market. It also enables users to simultaneously test the Tx-L and L-Rx loops. LO phase noise at 27GHz for the Ka-band instrument is -110dBc/Hz at 1MHz offset and non-signal related spurious are guaranteed at below -60dBc.
The architecture of each channel contains a synthesised local oscillator (LO), the frequency of which can be changed in either 25MHz steps or 1KHz steps so that the Tx and Rx bands relate to the L-band modem frequencies of 950-1700MHz or 950-2450MHz.
The transfer characteristics of each path can also be defined independently in terms of attenuation range, conversion loss and filtering to suit the performance requirements of the individual station.
Control of both LO frequency and transfer attenuation can be managed either locally with easy-to-use touch controls or remotely via ethernet with GUI, and separately for each of the two links.
Frequency stability is assured with a choice of either internal OCXO with better than +/-0.05ppm over temperature or by an external 10MHz system source.
"What makes our Dual Channel LTTs unique is the simultaneous translation of transmit (Tx) frequencies to L-band and L-band to receive (Rx) frequencies using one unit. By adding a Ka-band unit users now have even greater choice when it comes to testing and monitoring uplink and downlink signals at the same time," revealed CEO, Geoff Burling.
Most popular news in Test & measurementYokogawa launches WT5000 precision power analyzer
Evolution of Anritsu Protocol Test System supports 5G New Radio
First 5G NR network measurement solution
53 Gbaud upgrade released for PAM4 optical signal analysis
R&S signal and spectrum analyzer now with 5G new radio uplink
Share this page
Want more like this? Register for our newsletter