20 Dec 2012

Dynamic dual-core optical fibre boosts data processing

UK researchers have developed a dual-core optical fibre that is said to perform the same functions as a conventional optical fibre, just by applying a miniscule amount of mechanical pressure.

The cores of the nanomechanical fibres are suspended less than 1 micron apart from each other, and promise to greatly enhance data processing and also serve as sensors in electronic devices.

"Nanomechanical optical fibers do not just transmit light like previous optical fibers," says Wei H. Loh, deputy director of the EPSRC Centre for Innovative Manufacturing in Photonics and researcher at the Optoelectronics Research Centre, both at the University of Southampton. "Their internal core structure is designed to be dynamic and capable of precise mechanical motion."

"This mechanical motion, created by applying a tiny bit of pressure, can harness some of the fundamental properties of light to give the fiber new functions and capabilities," he adds.

As Loh explains, the innovation was achieved by fabricating fibre with two cores that are close enough to each other to be optically coupled, a property of light by which a photon's influence can extend beyond the fibre's core, even though the light itself remains inside.

By shifting the position of one of the cores by just a few nanometres, the researchers changed how strongly the light responded to this coupling effect.

If the coupling effect is strong enough, the light immediately jumps from one fibre to the other.

According to Loh, the flexible suspension system of the fibre easily responds to the slightest bit of pressure, bringing the two cores closer together or moving them apart, thereby controlling when and how the signals hop from one core to the other, reproducing, for the first time, the function of an optical switch inside the actual fibre.

This same capability may also enable optical buffering, which, according to the researchers, has been very hard to achieve.

"With our nanomechanical fiber structure, we can control the propagation time of light through the fibre by moving the two cores closer together, thereby delaying, or buffering, the data as light," says Loh.

Buffers are essential when multiple data streams arrive at a router at the same time; they delay one stream so another can travel freely.

To create the new fibers, the researchers heated and stretched a specially shaped tube of optical glass with a hollow center containing two cores suspended from the inside wall.

The fibres maintain this original structure as they are drawn and stretched to the desired thickness.

According to the researchers, this is the first time that nanomechanical dual-core fibers have been directly fabricated.

Other types of multicore fibers have been fabricated previously, but their cores are encased in glass and mechanically locked. This previous design meant that routing, switching, or buffering data involved taking the light out of the optical fibre for processing in the electronic domain before reinsertion back into the fiber, which is cumbersome and costly.

"An implication of our work is that we would integrate more of these functions within the fiber backbone through the introduction of MEMS (microelectromechanical systems) functionality in the fibres," says Loh.

Since the new process utilizes traditional fibre optic manufacturing techniques, it's possible to create dual-core fibers that are hundreds of meters to several kilometers long, which is essential for telecommunications.

Loh and his colleagues also expect this introduction of MEMS functionality into the optical fibre to have implications in other fields, such as sensing.

"Nanomechanical fibres could one day take the place of silicon-based MEMS chips, which are used in automobile sensors, video game controllers, projection displays, and other every-day applications," observes Loh.

And because the fibers are so sensitive to pressure and can be readily drawn to very long lengths, they also could be integrated into bridges, dams, and other buildings to signal subtle changes that could indicate structural damage.

The next step of their research is to test the fibres at longer lengths and to enhance the precision with which they perform switching and other functions.

The researchers hope that nanomechanical fibers could begin to enhance telecommunications and industrial systems within the next three to five years.

  • Research is published in the Optical Society's (OSA) open-access journal Optics Express.

Most popular news in Telecoms & networks

Discord chat app detection ensures optimized network usage
Talari receives 'Recommended' rating in SD-WAN group test
Rohde & Schwarz increases its commitment to network security
DPI solution from Rohde & Schwarz helps Indigo Software
Network synchronization IC product family designed for 5G wireless

All news in this channel | All news

Share this page

Want more like this? Register for our newsletter

Tick-Tock: What Your Engineers Could be Spending Time Doing if They Weren’t Stuck Designing a Display? Markku Riihonen | 4D Systems
Tick-Tock: What Your Engineers Could be Spending Time Doing if They Weren’t Stuck Designing a Display?
As soon as any design project is embarked upon, the clock starts ticking. The length of time needed to develop a system can impinge heavily on its commercial success. Windows of opportunity could be missed if it takes too long to complete, with products from rival companies gaining greater market share.

Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy