01 Mar 2017

Low power Satnav chips for portable & wearable applications

u-blox has launched its new UBX‑M8230‑CT global navigation satellite system (GNSS) receiver chip, offering a unique balance of performance and ultra-low power use.

The new UBX-M8230-CT is a development of the previous generation GNSS chips from u-blox. The new device is aimed at all manner of tracking applications and offers a considerably low level of power consumption.

Typically the power is down by a factor of three. Although this slightly impacts accuracy, it is still more than sufficient for most applications, especially where power is an issue. Such applications include fitness bands, sort watches, smart watches and general tracking devices.

As with all GNSS receivers the major power consumption is within the RF as it requires to be very low noise to receive the exceedingly low power DSSS signals from the satellites. The power consumption has been reduced by introducing an innovative time division system that enables the signals to be received sufficiently to provide accurate location, whilst reducing he power consumption. Even with this scheme the position update still occurs at a rate of at least once a second, which is more than sufficient for most applications.

“Constantly needing to know the user location in wearables has a strong strain on the battery, which has traditionally limited GNSS adoption. UBX-M8230-CT’s low power consumption combined with its high positioning accuracy and the ultra small design footprint of < 30 mm2 makes it possible to add GNSS to virtually all wearables,” said Florian Bousquet, Market Development Manager, Product Centre Positioning at u-blox.

The new device offers a number of new possibilities including using the device in devices like heart rate monitors that can be linked to position and hence situation awareness.

Most popular news in Satellite technology

Network-free location tracker helps groups stick together
AtlanTecRF announces its next innovation in satcom test equipment
GNSS LNA front-end modules for IoT applications
Low cost, high precision GNSS module launched
High accuracy positioning for autonomous vehicles

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter






Tick-Tock: What Your Engineers Could be Spending Time Doing if They Weren’t Stuck Designing a Display? Markku Riihonen | 4D Systems
Tick-Tock: What Your Engineers Could be Spending Time Doing if They Weren’t Stuck Designing a Display?
As soon as any design project is embarked upon, the clock starts ticking. The length of time needed to develop a system can impinge heavily on its commercial success. Windows of opportunity could be missed if it takes too long to complete, with products from rival companies gaining greater market share.









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy