04 Sep 2017

Compact single output power supplies provide up to 300W

Powersolve announces a series of compact, single output AC-DC converters designed to provide up to 300W across a wide operating temperature range of -30⁰ to +85⁰C. The seven model PSY300 series power supplies are open PCB units with a 3 x 5in footprint.

Operating from a wide 90 to 264VAC input range with active PFC, models in the PSY300 series provide output voltages from 12 to 54VDC with output currents from 3.70A to 16.67A convection cooled and from 5.55A to 25A with fan cooling. A 12V, 0.3A fan supply is a standard feature. Powersolve can also supply models with output voltages from 9V to 57VDC, still within the safety approvals, but subject to minimum order quantities.

PSY300 units are efficient (up to 92%) and feature a no load power consumption figure of 0.25W without fan and the integral LED power indicator.

The power supplies are protected against short circuit, over current, over voltage and over temperature and feature remote sense and power fail signal.

The PSY300 series meet all relevant EMI radiated and conducted standards and have a number of safety approvals including CE, CB EN60950-1 and UL/cUL60950-1.

Most popular news in Power management

1K Watts at 97% efficiency for telcom & networking equipment
Full MoPPs isolation modular power supplies offer up to 18 outputs
600 to 1200W power supplies have full MoPPs isolation
DCM in ChiP package expands enhanced output voltage regulation models
Pure sine wave output UPS series provides up to 4000VA

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter






The benefits of replacing plain old paper with e-paper displays in automotive assembly plants HD Lee | Pervasive Displays
The benefits of replacing plain old paper with e-paper displays in automotive assembly plants
Efficiency is at the heart of automation, and that is nowhere more apparent than in the manufacture of automobiles. The Ford Motor Company is widely credited with inventing the moving assembly line, but the concept of moving the assembly, rather than the worker, dates back centuries.









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy