29 Nov 2017

600W bulk power for convection cooled power supply series

Excelsys Technologies, an Advanced Energy company and manufacturer of modular user configurable power supplies announces the availability of new output module for its revolutionary CoolX series of convection cooled modular configurable power supplies.

The new CmE bulk power module provides up to 600W power from one module (occupying three slots). The addition of this module greatly increases product and system flexibility while significantly reducing total cost through reduced component count and simplifying configuration and system integration.

Initially available with a 24V output, the bulk power module provides up to 25A output current capability. It is ideal for applications requiring one higher power output with additional lower outputs, which can be configured between 2.5V and 58 V using the existing CoolX modules.

“We have many applications where customers configure a number of outputs in parallel to provide high power outputs,” comments Dermot Flynn, Sales Director of Excelsys Technologies. “We expect that the same will be the case with CoolX and have therefore developed the CmE CoolMod” continues Flynn. “It is a 24V, 600W module and rather than having three isolated outputs to be connected, adjusted and set up to current share etc. customers will now have just one power connection point and a single connection for control etc. This new high power module along with existing output modules allows customers to centralise all their power requirements in a one power supply, greatly simplifying system integration.”

The Excelsys CoolX600 power supply series offers system integrators unparalled flexibility with analogue and digital management with PMBus monitoring and control capability and is user field configurable with Plug and Play power. All outputs are isolated and may be connected in series or parallel to achieve higher output voltages or currents. Mounting options include base, side and Din Rail alternatives

The CoolX600 is available with full safety certifications to UL/EN60950 and UL/EN60601 3rd and 4th Edition (EMC) for both industrial and medical applications. Stand-out medical features include BF rating (Body Floating), dual fusing, 2 x MOPP, <300uA leakage current as well as optional ultra-low leakage current of 150uA.

Additional features include SEMI F47 compliance and operation at 5000m altitude. A 24W standby power output (available as either 12V or optional 5V), offering effectively another output, for system intelligence, cooling fans, displays etc. is a standard feature.

The CoolX600 can be populated with up to 4 CoolMods, providing up to 5 isolated DC outputs ranging from 2.5V to 58.0V. The CoolX600 offers customers flexibility and is completely user and field configurable. Outputs can be configured to the required set point voltages and connected in parallel of series for higher output current and/or higher output voltages.

Typical applications include medical clinical diagnostic equipment, medical lasers, dialysis equipment, radiological imaging and clinical chemistry. Industrial test and measurement, industrial machines, automation equipment, printing, telecommunications, audio equipment and high reliability harsh industrial electronics, radar, (Naval, Ground Based), communications, test and measurement.

Other products in the Excelsys range include the UltiMod and Xgen user configurable modular power supplies suitable of applications including, industrial, medical, laser, communications, IT, wafer fabrication, optical inspection, wire bonding, and automated test equipment.

Most popular news in Power management

Bidirectional buck-boost switching regulator controller is 98% efficient
USB power delivery controllers with fully integrated power paths
5kW 1U programmable DC power series now with 5 new output configurations
Chassis mount power supplies housed in low profile metal case
Flex Power Modules debuts ultra-efficient 700W half-brick DC/DC converters

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter






GaN’s Ground-Floor Opportunity Rudy Ramos | Mouser Electronics
GaN’s Ground-Floor Opportunity
The electronics industry has a major role to play in helping to save energy, by enabling better equipment and new ways of working and living that that are more efficient and environmentally friendly. Maintaining the pace of technological progress is key, but improvements become both smaller and harder to achieve as each technology matures. We can see this trend in the development of power semiconductors, as device designers seek more complex and expensive ways to reduce switching energy and RDS(ON) against silicon’s natural limitations.









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy