24 May 2018
2MHz boost/SEPIC/inverter features 2A, 100V power switch
Analog Devices announces the Power by Linear LT8361, a current mode, 2MHz multitopology DC/DC converter with an internal 2A, 100V switch. It operates from an input voltage range of 2.8V to 60V, and is suitable for applications with input sources ranging from a single-cell Li-Ion battery to multicell battery stacks, automotive inputs, telecom power supplies and industrial power rails.
The LT8361 can be configured as either a boost, SEPIC or an inverting converter. Its switching frequency can be programmed between 300kHz and 2MHz, enabling designers to minimize external component sizes and avoid critical frequency bands, such as AM radio. Furthermore, it offers over 90% efficiency while switching at 2MHz.
Burst Mode operation reduces quiescent current to only 9μA while keeping output ripple below 15mVp-p. The combination of a small MSOP-16E package and tiny external components due to the high switching frequency ensures a highly compact footprint while minimizing solution cost.
The LT8361’s 375mΩ power switch delivers efficiencies up to 95%. The LT8361 offers spread spectrum frequency modulation to minimize EMI concerns. A single feedback pin sets the output voltage whether the output is positive or negative, minimizing pin count. Other features include external synchronization, programmable UVLO, frequency foldback and programmable soft-start.
The LT8361EMSE is available in an MSOP-16E package (4 pins removed for high voltage spacing). An industrial temperature (–40°C to 125°C) version (the LT8361IMSE) and a high temperature (–40°C to 150°C) version (the LT8361HMSE) are also available. All versions are available from stock.
Summary of Features: LT8361
Wide Input Voltage Range: 2.8V to 60V
Internal 2A, 100V Power Switch
Ultralow Quiescent Current & Low Ripple Burst Mode Operation: IQ = 9μA
BIAS Pin for Higher Efficiency
Positive or Negative Output Voltage Programming with a Single Feedback Pin
Programmable, Synchronizable Frequency: 300kHz to 2MHz
Optional Spread Spectrum Frequency Modulation for Low EMI
Thermally Enhanced 16-Lead MSOP package
Most popular news in Power managementEfficient supercapacitor backup power management system unveiled
Highly configurable DC-DC converter offers integrated H-Bridge
60V low IQ buck controller plus 4-channel 8A configurable buck DC/DCs
DC gate driver with adjustable current drive launched
Programmable super sequencer makes things simple
Share this page
Want more like this? Register for our newsletter