06 Jul 2018

1K Watts at 97% efficiency for telcom & networking equipment

Murata has announced the 1 kW DRQ-11.4/88-L48 Series of quarter brick, intermediate bus, DC/DC converter modules that address the growing power requirements of high-reliability networking and telecommunications infrastructure equipment.

The fully regulated DRQ-11.4/88-L48xx Series provides 11.4 Vout at 88 A, with a Vin Range of 36 to 60 Vdc, operating from 48 Vdc battery systems or networking equipment that operates at 54 Vin.This fully regulated, fixed frequency, 1 kW rated bus converter boasts efficiency level of 97 %.

Developed by Murata Power Solutions to the industry standard DOSA high power 1/4 brick specification, the DRQ-11.4/88-L48xx DC-DC converter modules are available with many standard features and options including parallel load sharing of two or more modules, pre-bias protection, positive or negative on/off logic options, short circuit protection, over current/voltage and over temperature protection. The DRQ-11.4/88-L48 Series supports pre-biased start-up, eliminating reverse current issues during system start and shutdown.

Safety rated for networking and telecommunications applications; the fully isolated modules provide 1,500 Vdc of Input / Output isolation with an operational insulation safety rating. In order to provide industry leading reliability the DRQ-11.4/88-L48 Series is designed and tested to meet the industry requirements of IPC-9592 Revision B.The converters’ integrated baseplate design enhances thermal performance and its 97 % efficiency promotes cooler operation for reliability and longevity.

The primary applications for Murata’s DRQ-11.4/88-L48 are networking and telecommunications infrastructure equipment, communications equipment, network security, routers, wireless base stations, telecommunications switches and electronics, computing equipment and other applications requiring power conversion to an intermediate bus voltage of 11.4 V.

Most popular news in Power management

Full MoPPs isolation modular power supplies offer up to 18 outputs
DCM in ChiP package expands enhanced output voltage regulation models
1K Watts at 97% efficiency for telcom & networking equipment
600 to 1200W power supplies have full MoPPs isolation
Pure sine wave output UPS series provides up to 4000VA

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter






Next Generation Freight Transport Mark Patrick | mouser Electronics
Next Generation Freight Transport
As road freight transport levels continue to grow, concerns about the impact on the environment and human health come sharply into focus. Fossil fuel dependency makes it a leading source of greenhouse gas (GHG) emissions, but shifting freight to other transportation modes will prove challenging. Solutions that will improve the efficiency and performance of road freight transport are therefore essential to achieve defined environmental goals. In this blog, we will explore a potential solution that has been pioneered by Siemens - called eHighway. This combines the efficiency of electrified railways with the flexibility of trucks in order to form an innovative, next generation freight traffic system that is efficient, economical and environmentally friendly.









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy