22 Nov 2018
Single phase EMC filters provide attenuation across wide frequency band
TDK Corporation has announced the introduction of the RSKN series of 6A, 10A, 20A and 30A, 250Vac/250Vdc rated EMC filters. A two stage design delivers high attenuation across a wide 100kHz to 100MHz frequency range and provides protection against high voltage input pulses.
The general purpose RSKN series is suitable for use in a wide range of industrial and communications applications.
The filters are packaged in metal cases with sizes ranging from 47mm x 107mm x 26mm (W x L x H) for the 6A, to 67mm x 151mm x 35mm for the 30A. The terminal blocks have integral covers to avoid lost hardware.
The RSKN filters will operate in ambient temperatures of -25 to +85°C, derating above 50°C for the 6A and 10A and above 45°C for the 20A and 30A models. All models are certified to UL1283, CSA C22.2 No.8, EN60939 safety standards and are RoHS2 compliant. The products have a five year warranty.
Most popular news in Electronics componentsVersatile EMI filters range is high quality and cost effective
Pico-Clasp Wire-to-Board Connectors offer variety of mating styles
High reliability 3.00mm pitch power connectors from Harwin
H-bridge driver IC supports low-voltage, large current drive
Cliff Electronics grows its FeedThrough range
Share this page
Want more like this? Register for our newsletter