17 Aug 2018

HARTING expands Easy Access series of housings for D-Sub connectors

HARTING has added three new versions to its Easy Access series of housings for its D-Sub InduCom family of industrial Bus interface connectors.

The new models, with 25, 15 and 9-poles respectively and three straight cable-entry points each, complement the existing 50-pole and 37-pole units, each having three straight cable-entry points. The straight cable inputs lead to easier and faster assembly, even under cramped space conditions.

The wide range of standard InduCom housings for 9, 15, 25, 37 and 50-poles means it was already possible to use three cable entries. However, two of the cable entries are located on the side, making it difficult to access the locking screws with a tool. Consequently, it was previously necessary to place the housings next to each other at a certain distance to enable easier locking and unlocking.

With the 37 and 50-pole Easy Access housings with three straight cable entries, the locking screws are more easily accessible. This means the housings can now be sited closer together, significantly easing assembly. The standard housings with 15 and 9-poles offer only a straight cable entry.

The new versions in 25, 15 and 9-poles now offer two straight cable entries in combination with easy accessibility to the locking screws, thus permitting the housings to be placed in very close proximity to one another. This development echoes the trend of miniaturisation and offers the customer valuable space savings in its application. HARTING offers various versions with captive hexagonal and knurled screws with 4-40UNC or M3 thread. In addition, there are versions with and without an internal grounding block. Naturally, the new housings are compatible with the existing crimp flange / crimp sleeve and cable clamping area.

Most popular news in Electronics components

Improved PicoBlade connector system for expanding communications markets
150°C conductive polymer hybrid capacitor portfolio in THT format
Heavy-duty connectors deliver excellent value
Bidirectional buffer provides automatic connection and isolation
XRP customisable recessed socket plates provide custom connectivity

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter






GaN’s Ground-Floor Opportunity Rudy Ramos | Mouser Electronics
GaN’s Ground-Floor Opportunity
The electronics industry has a major role to play in helping to save energy, by enabling better equipment and new ways of working and living that that are more efficient and environmentally friendly. Maintaining the pace of technological progress is key, but improvements become both smaller and harder to achieve as each technology matures. We can see this trend in the development of power semiconductors, as device designers seek more complex and expensive ways to reduce switching energy and RDS(ON) against silicon’s natural limitations.









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy