21 Nov 2017
Glass-encapsulated thermistors provide moisture resistance
Ametherm has announced that its DG series of glass-encapsulated thermistors for high-accuracy temperature sensing in automotive and industrial applications is now in stock at Digi-Key. Hermetically sealed DG series devices eliminate errors in resistance readings due to moisture penetration while offering high operating temperatures and a compact size.
Ametherm's glass-encapsulated DG series provides designers with faster, more accurate, and less expensive alternatives to thermocouples and RTD probes. DG series devices are free from limitations due to solder temperature, which enables them to offer users a wide operating temperature range of -40 °C to +300 °C. With diameters of only 1.5 mm, the devices boast a small size that allows for encapsulation in a variety of housings, such as ring lugs and hex nuts.
DG series thermistors are available in four resistance values at 25 °C — 10 kΩ, 40 kΩ, 50 kΩ, and 100 kΩ — with resistance tolerances down to ±2 %, a dissipation constant of >0.5 mW/°C, and thermal time constant of <6.5 s. The devices provide temperature coefficient of resistance of -3.9%/°C, -4.40 %/°C, and -4.75 %/°C; beta values of 3500 °K, 3950 °K, and 4200 °K; and 32 AWG dumet wire leads.
Samples and production quantities of the devices are available now, with factory lead times of six to eight weeks.
Most popular news in Electronics componentsLow reverse-current Schottky diode offers improved thermal performance
Offline buck converter for IoT applications
Micron-to-sub-millimeter accuracy for 3D printers
Efficient controller IC solutions enable optimized LED lighting
38VIN, 10A boost µModule regulator ideal for driving LEDs
Share this page
Want more like this? Register for our newsletter