09 Jul 2018

60V synchronous boost LED controller launched

Analog Devices announces the Power by Linear LT3762, a 60V output, high efficiency, synchronous, boost LED driver controller with a programmable internal LED PWM signal generator and spread spectrum frequency modulation that yield low EMI noise.

The versatile LT3762 includes a rail-to-rail current sense amplifier, enabling high side or low side current sensing that in addition to synchronous boost facilitates synchronous buck-mode and buck-boost mode topologies and nonsynchronous SEPIC designs.

The LT3762’s 2.5V to 38.5V input voltage range and synchronous operation is ideal for automotive power systems, portable instruments, industrial applications, medical instruments and architectural lighting. An auxiliary on-chip buck-boost converter provides the necessary gate drive voltage in low voltage systems, and when combined with a low 500µA maximum quiescent current and 1µA shutdown current (TA = 25°C), results in high efficiency over wide input voltage and output current ranges.

In systems where EMI is a concern, the LT3762’s optional spread spectrum frequency modulation can be enabled to reduce the effective switching frequency noise. An on-chip PWM signal generator is synchronized to the internal oscillator for lowest noise performance. Internal PWM generation provides 250:1 dimming; external 3000:1 dimming or analog dimming can also be employed.

Other features of the constant current and constant voltage LT3762 include current mode operation with cycle-by-cycle current limiting, adjustable 100kHz to 1MHz switching, programmable undervoltage lockout, open LED and short-circuit protection with fault status indicators, LED overcurrent protection and thermal shutdown.

The LT3762 is available in thermally enhanced 28-lead TSSOP and 4mm x 5mm QFN packages. Three temperature grades are available, with operation from –40°C to 125°C (junction) for the extended and industrial grades, and a high temperature grade of –40°C to 150°C.

Summary of Features: LT3762

  • Synchronous Controller for Highest Efficiency

  • 500µA Maximum Quiescent Current and 1µA Shutdown Current (TA = 25°C)

  • Optional Spread Spectrum Frequency Modulation for Low EMI

  • Internal 250:1 PWM Signal Generator

Most popular news in Electronics components

Infineon acquires Siltectra, a specialist for silicon carbide
Gallium nitride solutions from Infineon are in volume production
Toshiba adds new 4-channel linear power amplifier for car audio
98.5%-efficient high voltage BLDC motor driver IC family launched
USB Type-C/PD Controller IC Enables 3A Current Delivery

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter






Long-range low-power wireless network have the potential to create the Internet of Agricultural Things Mark Patrick | Mouser Electronics
Long-range low-power wireless network have the potential to create the Internet of Agricultural Things
The application of technology has always driven an increase in productivity, the two are inextricably linked because it is often the demand for higher productivity that provides the motivation for achieving technological breakthroughs; necessity is the mother of invention, after all.









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy