13 Mar 2017

Tiny horn antennas aid testing of 5G millimetre-wave equipment

Link Microtek, the manufacturer of RF and microwave components and subsystems, has unveiled a new family of miniature horn antennas that are designed to be used for millimetre-wave testing in 5G developments and EMC compliance.

Ideal for test houses or manufacturers of E-band radio communications equipment, the AMHA-V1 series of horns can be utilised as either transmitters or receivers for measurements of products’ electromagnetic susceptibility or emissions in accordance with international EMC standards laid down by organisations such as IEC, ISO and CISPR.

The series consists of six models with operating frequency bands starting from 40-60GHz and rising all the way up to 170-260GHz to allow measurement of harmonics. The smallest unit, covering the highest frequency band, is only 16.6mm in length, while its WR4 waveguide opening has inner dimensions of just 1.09 x 0.55mm. All six horns in the range deliver a typical gain of 20-23dBi and feature a modified standard flange design to ensure correct mounting within the test rig.

Designed and manufactured at Link Microtek’s facility in Basingstoke, UK, the AMHA-V1 millimetre-wave horns are accurately machined for optimum performance and can be fabricated from either brass or aluminium with a black satin paint finish.

Most popular news in Antennas & propagation

Active Passive Antennas address 5G demand
High performing 3G,4G/LTE antennas for the smallest PCBs
Plug-and-play antenna chip simplifies phased array radar
CommScope upgrades microwave antenna portfolio
Taoglas launches online antenna & cables ordering

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter






The benefits of replacing plain old paper with e-paper displays in automotive assembly plants HD Lee | Pervasive Displays
The benefits of replacing plain old paper with e-paper displays in automotive assembly plants
Efficiency is at the heart of automation, and that is nowhere more apparent than in the manufacture of automobiles. The Ford Motor Company is widely credited with inventing the moving assembly line, but the concept of moving the assembly, rather than the worker, dates back centuries.









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy