17 Oct 2018

2mm Pitch Industrial Connectors for Heavy Vibrations & Shocks

Capable of withstanding a 10G vibrational force for a period of 6 hours, the components in Harwin’s new M225 connector series are intended for industrial deployment.

These compact, high performance cable-to-board units feature a robust construction for prolonged operational lifespan, thanks to their glass-reinforced poly-phenylene sulphide (PPS) enclosures, with a 100MΩ minimum insulation resistance ensuring continued signal integrity.

They have a double row contact arrangement with a 2mm pitch – enabling mating of their through-board PCB male connectors to the corresponding female crimp connectors – with an array of different wire sizes (from 22AWG to 28AWG) being accommodated. Each tin-plated copper alloy male contact has a current rating of 3.3A (3.0A when all contacts are electrically loaded simultaneously) and a maximum contact resistance of 25mΩ.

When mated, the single-piece female contacts each have 3 surfaces touching the corresponding male pin. This means that reliable interconnection is maintained, even when placed in the most uncompromising of application settings and under extremely challenging working conditions.

A rapid mate-before-lock retention system has been developed to increase mated connector holding force, and assist with vibration resilience. The female connector is fitted with rubber retainers, and locking pins are supplied loose. These pins are pushed into the rear of the mated female connector, and subsequently expand the rubber retainers to grip onto the male connector.

There are shrouded contacts on both the male and female connector elements, thereby preventing damage, while polarized housings safeguard against the possibility of mis-mating. The female crimp contacts are available on reels (for high volume automated production) or loose (for prototyping purposes), with a hand crimp tool offered for low volume.

An operational temperature range of -55°C to +125°C is covered and a 50 mating cycle lifespan supported. These components are aimed at factory automation and processing machinery, industrial drives, robotics, test/monitoring instrumentation, handheld test equipment and industrial automation controls.

Most popular news in Electronics components

Infineon acquires Siltectra, a specialist for silicon carbide
Expansion of Pyreos' dual and quad analogue infrared sensor range
Gallium nitride solutions from Infineon are in volume production
98.5%-efficient high voltage BLDC motor driver IC family launched
16nm defence-grade UltraScale+ portfolio unveiled by Xilinx

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter






Gladys West - Pioneer of GPS Sven Etzold | U-blox
Gladys West - Pioneer of GPS
GPS and GNSS positioning technology is such an integral part of our lives today that we rarely stop to think about where it all came from. When we do, we usually picture men in white shirts and dark glasses hunched over calculators and slide rules. In fact, one of the early pioneers behind GPS and GNSS technology was Gladys West - a black woman.









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy