VME Interrupts

- details of the various interrupts used within the VMEbus including the different types of VME interrupt available.

One of the key attributes of the VME system is the interrupts that are available.

These interrupts enable the system to operate in the asynchronous manner required for its applications.


VME interrupt basics

The VMEbus system includes a Priority Interrupt Bus that enables the VME device in the rack to asynchronously request service from the controller. This enables the device to gain the attention from the master at any time.

The system has seven VME interrupt lines that are physically connected to all slots in the chassis.


<< Previous     |     Next >>


Share this page


Want more like this? Register for our newsletter






Gladys West - Pioneer of GPS Sven Etzold | U-blox
Gladys West - Pioneer of GPS
GPS and GNSS positioning technology is such an integral part of our lives today that we rarely stop to think about where it all came from. When we do, we usually picture men in white shirts and dark glasses hunched over calculators and slide rules. In fact, one of the early pioneers behind GPS and GNSS technology was Gladys West - a black woman.









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy