Mobile Phone Systems Overview

- a summary or overview of cellular radio communications technology and the major mobile or cell phone systems from the analogue (1G systems through the 2G and 2.5G systems to the latest 3G systems.


History of Mobile Phones Includes:
Cellular telecommunications history     Cell phone systems table     Vintage & classic mobile phones     GSM history     UMTS history     5G history & timeline    


Cellular technology has developed a long way since the first mobile phone systems were introduced. Since the beginnings of cellular technology in the 1970s and 1980s, many different mobile phone systems have been used, and currently a large variety of phone systems are in use now.

Originally a vast number of cellular systems were used when the first analogue cellular technologies were introduced. Many countries had their own cellular systems, making for a large number of different systems around the globe. With the introduction of GSM and the possibility of international roaming, the number of cellular systems that were deployed reduced. However the systems that were available underwent a number of developments enabling data to be sent, or increasing the rates at which data could be sent over the networks. The overall result is a bewildering number of different systems, each with its own advantages and disadvantages.

To try to summarise the different cellular telecommunications systems that have been used the table below has been compiled. It gives an overview of the different mobile phone systems or cellular technologies that are in use today and those that have been used over the years. Although not every cellular technology is included, those that have been more widely used are included.

Mobile Phone System Generation Channel Spacing Access Method Comments
AMPS 1G 30 kHz FDMA

Advanced Mobile Phone System, this analogue system was first developed and used in the USA.

NAMPS 1G 10 kHz FDMA

Narrow band version of AMPS chiefly used in the USA and Israel based on a 10 kHz channel spacing. The aim was to conserve spectrum and thereby allow a larger number of users.

TACS 1G 25 kHz FDMA

Analogue system developed by Motorola was originally used in the UK. Based around 900 MHz, this system spread world wide. After the system was first introduced, further channels were allocated to reduce congestion, in a standard known as Extended TACS or ETACS

NMT 1G 12.5 kHz FDMA

Nordic Mobile Telephone. This analogue system was the first cellular technology to be widely used commercially being launched in 1979. It was used initially on 450 MHz and later at 900 MHz. It was used chiefly in Scandinavia but it was adopted by up to 30 other countries including Oman.

NTT 1G 25 kHz FDMA

Nippon Telegraph and Telephone. This cellular technology was used in Japan in the 900 MHz frequency band with a 55 MHz transmit receive spacing. (A high capacity version known as HICAP was also developed).

C450 1G 20 kHz FDMA

The system adopted in West Germany (East Germany was separate at this time). It used a band in the region of 450 MHz along with a 10 MHz receive / transmit spacing.

GSM 2G 200 kHz TDMA

Originally called Groupe Speciale Mobile, the initials later stood for Global System for Mobile communications. It was developed in Europe and first introduced in 1991. This cellular technology was originally used on frequencies around 900 MHz, but its use has been expanded to other bands including those around 1800 MHz, 1900 MHz and 850 MHz (the latter two are mainly used in North America). GSM is the most widely used cellular technology with over 2 billion subscriptions currently active.

DCS 1800 2G 200 kHz TDMA

The original name for GSM used at 1800 MHz.

PCS 1900 2G 200 kHz TDMA

The original name for GSM used at 1900 MHz.

TDMA 2G 30 kHz TDMA

Although it was originally known as US Digital Cellular (USDC) and was introduced in 1991. It is sometimes called North America Digital Cellular and also known by its standard number IS-54 that was later updated to standard IS136. It is a 2G digital system that was designed to operate alongside the AMPS system.

PDC 2G 25 kHz TDMA

Pacific or Personal Digital Cellular. The system found only in Japan where it has gained very widespread use. It has many similarities with IS-54 although it uses a different speech coder and a 25 kHz bandwidth.

GPRS 2.5G 200 kHz TDMA

General Packet Radio Service. A data service that can be layered onto GSM. It uses packet switching instead of circuit switching to provide the required performance. Data rates of up to 115 kbps attainable.

EDGE 2.5 / 3G 200 kHz TDMA

Enhanced Data rates for GSM Evolution. This cellular technology uses a different form of modulation (8PSK) and packet switching which is overlaid on top of GSM to provide the enhanced performance. Systems using the EDGE system may also be known as EGPRS systems.

cdmaOne 2G 1.25 MHz CDMA

This is the brand name for the cellular technology with the standard reference IS95. It was the first CDMA system to gain widespread use. The initial specification for the system was IS95A, but its performance was later upgraded under IS95B which the cdmaOne specification actually uses. Apart from voice it also carries data at rates up to 14.4 kbps for IS95A and under IS95B data rates of up to 115 kbps are supported.

CDMA2000 1X 2.5G 1.25 MHz CDMA

This cellular technology supports both voice and data capabilities within a standard 1.25 MHz CDMA channel. CDMA2000 builds on cdmaOne to provide an evolution path to 3G. The system doubles the voice capacity of cdmaOne systems and also supports high-speed data services. Peak data rates of 153 kbps are currently achievable with figures of 307 kbps quoted for the future, and 614 kbps when two channels are used.

CDMA2000 1xEV-DO 3G 1.25 MHz CDMA

The EV-DO stands for Evolution Data Only. This is an evolution of CDMA 2000 that is designed for data only use and its specification is IS 856. It provides peak data rate capability of over 2.45 Mbps on the forward or downlink , i.e. from the base station to the user. The aim of the system is to deliver a low cost per megabyte capability along with an always on connection costed on the data downloaded rather than connection time.

CDMA2000 1xEV-DV 3G 1.25 MHz CDMA

This stands for Evolution Data and Voice. It is an evolution of CDMA2000 that can simultaneously transmit voice and data. The peak data rate is 3.1 Mbps on the forward link. The reverse link is very similar to CDMA2000 and is limited to 384 kbps. In view of the success of CDMA2000 1xEV-DO, it has never been deployed, although it reached an advanced stage of development.

UMTS
(W-CDMA)
3G 5 MHz CDMA / TDMA

Universal Mobile Telecommunications System. Uses Wideband CDMA (W-CDMA) with one 5 MHz wide channel for both voice and data, providing data speeds up to 2 Mbps.

HSPA
(HSDPA and HSUPA)
3.5G 5 MHz CDMA / TDMA

High Speed Packet Access using High Speed Downlink Packet Access and High Speed Uplink Packet Access. HSPA provides for high speed packet data at speeds up to 14.4 Mbps in the downlink using packet data. The specifications were progressively released under Rel 4 to Rel 6 of the 3GPP specifications.

TD-SCDMA 3G 1.6 MHz CDMA

Time Division Synchronous CDMA. A cellular technology developed in China to establish their position on the cellular telecommunications arena. It uses the same bands for transmit and receive, allowing different time slots for base stations and mobiles to communicate. Unlike other 3G systems it uses only a time division duplex (TDD) system.

LTE 3.99 / 4G   OFDMA

The Long Term Evolution path for the UMTS / W-CDMA cellular technology. It provides broadband data throughputs and uses orthogonal frequency division multiplex (OFDM) as the modulation technique and Orthogonal Frequency Division Multiple Access as the access technique.

UMB 3.99G / 4G   OFDMA

Ultra-Mobile Broadband. This is the 3.99 / 4G evolution cellular technology for CDMA2000.

The different mobile phone systems and cellular technologies are always evolving to provide improved capabilities. Cellular operators need to look to increasing their ARPU (average revenue per user) and with revenues from voice alone falling, it is necessary to introduce new data services to improve revenues. As a result the different mobile phone systems and their associated cellular technologies will continue to evolve.

More History:
Radio history timeline     History of the radio     Ham radio history     Coherer     Crystal radio     Magnetic detector     Spark transmitter     Morse telegraph     Valve / tube history     PN junction diode invention     Transistor     Integrated circuit     Quartz crystals     Classic radios     Mobile telecoms history     Vintage mobile phones    
    Return to History menu . . .