23 Nov 2017

5G NR sub-6 GHz device testing platform

Rohde & Schwarz, a supplier of test and measurement equipment, is enabling the testing and validation of sub-6 GHz 3GPP 5G new radio (NR) based devices.

3GPP's 5G NR will support frequency ranges up to 52.6 GHz, but initial 5G designs will use frequencies below 6 GHz with a focus on 3.5 GHz. For these sub-6 GHz carrier frequencies, 3GPP currently discusses a maximum bandwidth per component carrier of 100 MHz. Thus, the R&S CMW100 communications manufacturing test set with a measurement bandwidth of 160 MHz is ready for testing initial 5G NR sub-6 GHz wireless devices. Thanks to its high measurement speed, the R&S CMW100 is an ideal solution for high-volume production environments.



The flexible testing solution is suitable for all types of wireless devices, supporting LTE, WLAN and Bluetooth besides 5G NR sub-6 GHz. This makes the R&S CMW100 a cost-effective solution for mass production of cellular and non-cellular (wireless connectivity) devices calibrated and verified in so-called non-signaling mode (analyzer/generator). Manufacturers of handsets and devices profit from a variety of measurement functionalities with a single investment in equipment, training and adaptation costs.

Anton Messmer, Vice President Mobile Radio Testers at Rohde & Schwarz, said: “The evolution to 5G networks will employ a wider range of spectrum bands. Utilizing spectrum bands below 6 GHz is the decisive aspect of enabling deployments with reliable network coverage. The R&S CMW100 demonstrates Rohde & Schwarz capability to support 5G NR sub-6 GHz and will help accelerate the 5G ecosystem.”

The latest 160 MHz version of R&S CMW100 is available now from Rohde & Schwarz. Dedicated vector signal analysis and generator software options supporting 5G NR sub-6 GHz will be available in 2018.

Most popular news in Test & measurement

Anritsu ME7873LA Achieves PTCRB certification for 5DL CA RF tests
New high end 8 GHz oscilloscope raises the bar
3GPP C-V2X device testing for GCF protocol conformance
VIAVI launches new cellular IoT testing capabilities
USB measurement platform increases efficiency

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter







Next Generation Freight Transport Mark Patrick | mouser Electronics
Next Generation Freight Transport
As road freight transport levels continue to grow, concerns about the impact on the environment and human health come sharply into focus. Fossil fuel dependency makes it a leading source of greenhouse gas (GHG) emissions, but shifting freight to other transportation modes will prove challenging. Solutions that will improve the efficiency and performance of road freight transport are therefore essential to achieve defined environmental goals. In this blog, we will explore a potential solution that has been pioneered by Siemens - called eHighway. This combines the efficiency of electrified railways with the flexibility of trucks in order to form an innovative, next generation freight traffic system that is efficient, economical and environmentally friendly.









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy