01 Jun 2018

Ku-Band drone satellite simulator takes maiden flight

U.K. based Satcom RF Test company, AtlanTecRF has announced the first flight of its newly released Ku-Band Drone Satellite Simulator specifically designed to enable the testing of ocean going satcom systems.

The miniaturised Satellite Simulator was flown on an eight blade drone and in the tests the Ku unit received a signal while hovering above a ground terminal similar to the type that would be used on ocean going liners and large cargo ships. The Drone Satellite Simulator then transposed that signal and sent it back at downlink frequencies thereby simulating the satellite and allowing the testing of the ship’s antenna without the ship having to alter its course.

With the addition of the Ku-Band product, AtlanTecRF now offers a range of Drone Satellite Simulators that operate in either Ka-Band (30GHz uplink and 20GHz downlink) or Ku-Band (14GHz uplink and 11GHz downlink) with options of both circular and linear polarisation.

Each Drone Satellite Simulator can either draw its power from the same batteries providing lift to the drone or they can be supplied as self-sufficient with integral, rechargeable power storage.

Speaking at the company's research and development centre in Braintree, U.K. following the first flight, CEO Geoff Burling said "This new range of Drone Satellite Simulators brings a new dimension to satcom simulation. Initially our products have been ground or mast mounted, but the ability to have a Satellite Simulator on an aerial platform expands considerably the versatility of the testing regime and greatly reduces the costs of mobile systems.”

Most popular news in Satellite technology

Ku-Band drone satellite simulator takes maiden flight
Latest product range for off air satcom system tests unveiled
GPS tracker for pets with 6 month battery life
Multi-band receiver delivers centimeter-level accuracy in seconds
Low cost, high precision GNSS module launched

All news in this channel | All news

Share this page

Want more like this? Register for our newsletter

Next Generation Freight Transport Mark Patrick | mouser Electronics
Next Generation Freight Transport
As road freight transport levels continue to grow, concerns about the impact on the environment and human health come sharply into focus. Fossil fuel dependency makes it a leading source of greenhouse gas (GHG) emissions, but shifting freight to other transportation modes will prove challenging. Solutions that will improve the efficiency and performance of road freight transport are therefore essential to achieve defined environmental goals. In this blog, we will explore a potential solution that has been pioneered by Siemens - called eHighway. This combines the efficiency of electrified railways with the flexibility of trucks in order to form an innovative, next generation freight traffic system that is efficient, economical and environmentally friendly.

Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy