01 Feb 2018

VadaTech announces the UltraScale+ Module with high speed I/O

VadaTech, a manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, announces the AMC584. The AMC584 is a double-module in an AMC form factor card with Xilinx Virtex UltraScale+ XCVU13P FPGA and two banks of 64-bit wide DDR4. The XCVU13P FPGA provides over 12,000 DSP slices and 3,780 thousand logic cells.

The XCVU13P FPGA is routed to base and extended option regions (all the tongue one SERDES are routed). The module routes up to twenty lanes to Tongue 2 for PinoutPlus connection to neighbouring AMC’s (in chassis supporting this option) such as the AMC750, supporting high-speed data throughput within the MicroTCA standard. The front panel QSFP28 ports support data output of up to 5x 100 GbE over standard connectors for ease of connection to external equipment.

The AMC584 also contains a high-speed Zone 3 connector that provides the primary digital I/O routing. Multiple high-speed data acquisition modules (e.g. VadaTech AMC594) can be connected to the AMC584 (e.g. for generating I/Q or multi-polarizations), or this I/O can be routed to further FPGA AMCs for additional processing. The combination of AMC584 and AMC594 allows system integrators to construct signal acquisition systems with sample rates up to 56 GSPS, supported by extensive DSP processing and with up to 500 Gbps output.

Most popular news in Processing & embedded

"ADL120S" SBC with 7th generation Intel processor unveiled
Low cost target boards jump start embedded designs
VadaTech announces the UltraScale+ Module with high speed I/O
Red Hat OpenShift Container Platform becoming Kubernetes platform of choice
New additions to TI’s C2000 Piccolo microcontroller portfolio

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter






The fundamental things Or, a cos is still a cos |
The fundamental things Or, a cos is still a cos
These days we are all used to computer technology, but there were times when it was new and and really cutting edge. Looking back, the Hewlett Packard HP35 was an iconic calculator with its reverse Polish notation.
Training
Online - Fundamentals of Modern RF and Wireless Communications Engineering
This on-line course enables you to quickly get up-to-speed & understand key concepts of modern radio frequency, RF & wireless communications systems

More training courses










Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy