14 May 2018
Universal smart charger for NiMH/NiCD batteries
Powersolve announces a smart charger for NiMH and NiCD batteries. The PSCH30 will auto detect and charge 8 to 15 NiMH or NiCD cells in series and charge them at the correct voltage between 9.6V and 18VDC. A switch allows users to select the charge current between 0.9A to 1.8A while charging status is indicated by LED.
The PSCH30 universal charger operates from a universal 90 to 264VAC and incorporates several safety features including automatic cut-off when the cells are fully charged and battery over-temperature protection using a thermal sensor. Over voltage and short circuit protection are also standard.
Housed in a compact, desk-top plastic enclosure (120 x 60 x 38mm), the Powersolve PSCH30 is supplied as standard with an IEC320 C14 3 pin AC input connector while the output lead is 1.2m, terminated in a 4 pin Toby KPPX-4P connector. Powersolve also offers a variety of optional output connectors on request.
The CE marked PSCH30 meets all relevant safety and EMC standards including UL1310, CISPR22 ‘B’, FCC Part 15 ‘B’ and EN55022 ‘B’.
Most popular news in Power managementBGA packaging option for digital point-of-load DC/DC converters
DIN-Rail power supplies with internal decoupling and hot-swap connections
2MHz boost/SEPIC/inverter features 2A, 100V power switch
XP Power acquisition of Glassman High Voltage expands addressable market
Low profile, high density AC/DC ITE and medical power supply launched
Share this page
Want more like this? Register for our newsletter