23 Apr 2018
Rack mount AC-DC UPS series provides up to 300Watts DC output
Power supply specialist Powersolve announces the PFD Series, a “no break” power system designed to provide constant DC power without interruption. These are 1U, 19in rack mount units designed to provide 12, 24 or 48VDC from an input voltage of 180 to 264VAC (50/60Hz).
Models in the PFD Series provide either 150W or 300W output power and can be used as both a power supply and a charging device. Batteries are external and capacity depends on output load power required and length of hold up time in the event of a power failure. The batteries can also be hot-swapped.
Every unit incorporates an intelligent interface which allows the user to monitor the battery condition, input power condition and load status via an LED-based front panel display. Monitoring is achieved via dry contacts, RS232, USB and the optional SNMP Card which can allow computer monitoring even from a mobile phone.
For protection, the unit’s multi-channel outputs use independent fuses. Rapid response short-circuit protection limits the maximum output current which in turn prevents the fuse from blowing.
Models in the PFD Series meet the requirements of EN60950, measure 1U x 19in x 250mm deep and weigh 3.5kg (150W) and 4.5kg (300W).
Most popular news in Power managementBGA packaging option for digital point-of-load DC/DC converters
DIN-Rail power supplies with internal decoupling and hot-swap connections
2MHz boost/SEPIC/inverter features 2A, 100V power switch
XP Power acquisition of Glassman High Voltage expands addressable market
Low profile, high density AC/DC ITE and medical power supply launched
Share this page
Want more like this? Register for our newsletter