19 Dec 2017

Compact converters power energy-conscious IoT or industrial devices

Dengrove Electronic Components has the ideal power supplies for small IoT devices and industrial controls, with the launch of the RECOM RAC05-K series of highly integrated 5-Watt AC/DC converters.

Housed in a 25.4mm x 25.4mm fully encapsulated lightweight plastic case, and with important features such as short-circuit and over-voltage protection built in, RAC05-K modules can fit within tight spaces. They also meet EN55032 class-B specifications without requiring external filtering components. The modules are built to withstand harsh industrial or outdoor environments, and can operate from -25°C up to 50°C at full load, or 70°C with derating.

With very low no-load consumption of 75mW, and high light-load efficiency, the RAC05-K series is ideal for powering devices like wireless sensors or communication modules that are always on, with short periods of peak activity. Available with a single output voltage of 3.3V, 5V, 12V, 15V or 24V, they can also be used to operate relays, data gateways, or building-automation nodes. The modules feature a 60ms hold-up time at 230VAC input, to maintain a stable output even if the AC-line quality varies.

The RAC05-K series is fully certified to UL/IEC/EN60950-1 and UL/IEC/EN62368-1 with CB reports, CE marked, and covered by a three-year manufacturer’s warranty.

Most popular news in Power management

20 Amp 24V Cool-Power ZVS Buck launched
¼ brick DC:DC converters rated at 100W and 150W
Battery management system for safer, smarter cars of the future
Hybrid step-down controller reduces solution size by 50%
600W modular power supplies offer conduction cooling capability

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter






Fans in Digital Signage Players Are a Lose/Lose Proposition Jeff Hastings | BrightSign LLC
Fans in Digital Signage Players Are a Lose/Lose Proposition
Jeff Hastings of BrightSign has some interesting ideas on why fans should not be used in digital signage, and how to avoid using them.
Training
Online - Effective Vector Network Analyzer Measurements
How to make effective VNA measurements at RF and microwave frequencies

More training courses










Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy