23 Nov 2017

Fibre optic connectors with low noise signal connectivity

Cliff Electronics manufacture a wide range of optical connectors suitable for high quality audio systems, broadcast, AV installations, home theatre, automation, instrumentation, data and IT connectivity, medical equipment instrumentation, industrial control and data acquisition and other high bandwidth signal connections.

Cliff’s Feedthrough connector series includes SC Simplex, LC Duplex and TOSLINK EIAJ fibre-optic connection options available in plastic or rugged metal shells and designed to fit into the industry standard 24mm diameter XLR connector panel cutout, simplifying panel design and manufacture and improving design aesthetics.

Cliff also manufacture a wide range of single and dual optical transmitter and receiver jacks conforming to the EIAJ/JEITA rectangular standard CP-1201, (also RC-5720 and JIS C5974-1993 F05. Standard and low profile versions are available and three models replace a plug-in cover with a convenient hinged shutter to protect against contamination. The optical jacks are designed for PCB mounting and, some models have a self-tapping hole for panel mounting.

To accompany their optical connector range Cliff also manufactures moulded moulded optical lead assemblies (TOSLINK cables) for use with their optical jacks. TOSLINK (Toshiba Link) Optical Audio Data Cables conform to a standard, optical fibre, fiber, digital, audio interface. The standard is widely used in consumer audio equipment like CD players, DVD players, television set-top boxes, games consoles, computers and audio-visual receivers. Lead terminals conform to the EIAJ/JEITA rectangular standard CP-1201 and also RC-5720 and JIS C5974-1993 F05 standards for digital audio interfaces including fibre-optical fiber-optical interconnections.

John Hall, Managing Director of Cliff Electronics, comments; “Optical jacks are virtually unaffected by noise when transmitting and receiving signals between digital audio equipment and data systems, enabling high quality audio transmission and high speed data transfer. It continues to be adopted as a virtual standard in portable audio equipment and is becoming very popular in data-centres and instrumentation systems. With our feedthrough connector and jack options we can provide best-fit solutions for OEMs and Systems Integrators.”

Cliff Electronics are specialists in the design, development and manufacture of connectors, leads, test lead sets and accessories for a wide range of markets and supply major international OEMs. Their fast growing range of XLR footprint FeedThrough connectors allows designers to integrate audio, video, digital, optical, networking and data feeds into professional equipment for broadcast, lighting, audio and industrial applications.

Cliff FTs are now available in many options including RJ45, HDMI, BNC and USB3.0 compliant single and dual USB versions. Analogue, Digital and Optical Feed-Through connectivity is available in formats including Firewire, HDMI A-A and 50 ohm BNC versions, USB2 A-to-B and B-to-A “gender change” sockets high speed USB Type – C, USB3 to USB3 in all gender changing configurations - A-A, A-B and B-A. Also available are all popular data and Ethernet connectors including USB 2.0 and 3.0, LC and SC fibre (Duplex & Simplex), UTP and FTP RJ45s in both Cat6 and Cat5e (shielded and unshielded), Toslink, RCA Phono and HDMI and blanking plates.

Cliff is now offering system integrators 1U, 19” rack panels pre-assembled with up to 16 of their Feedthrough (FT) connectors to simplify system assembly, reduce manufacturing time, component count and cost. With applications including Broadcast and AV “patch panels” and MIL, Medical, Control and Instrumentation signal input/output panels etc. the 1U assemblies can be factory loaded with the specific connectors required by the system designer including BNC, single or dual USB or RJ45 with internal cable harnesses available as a special order.

As a UK manufacturer Cliff are able to respond quickly to customer’s needs for both standard products and custom designs. Cliff manufactures audio, optical and power connectors and accessories, general industrial connectors, foot pedals, lighting connectors, terminal posts and connection blocks, motors, fans and assembly aids. Cliff can also provide a wide range of leads including test and instrumentation, audio, instrument and power.

Most popular news in Electronics components

Protected optical contacts prevent dirt contamination
LED current controllers improve power of vision systems
D Series spring contacts with insulation coating
Protected optical contacts prevent dirt contamination
High-performance oscillators tackle high-speed transceiver clocking

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter






What to consider when incorporating an intelligent touch screen display into your product Markku Rihonnen | 4D Systems
What to consider when incorporating an intelligent touch screen display into your product
Gone are the days of rotary switches, push buttons and seven segment displays. Incorporating touch screen displays into embedded designs is the trend, accelerated of course by consumer adoption of the smartphone.
Training
Online - Designing GaN Power Amplifier MMICs
Learn how to design high performance GaN power amplifier MMICs

More training courses










Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy