14 Nov 2017

Active rectifier controller with reverse protection

Analog Devices announces the Power by Linear LT8672, an active rectifier controller with reverse input protection to –40V. Its 3V to 42V input voltage capability is ideal for automotive applications which must regulate through cold-crank and stop-start scenarios with minimum input voltages as low as 3.0V and load dump transients up to 40V.

The LT8672 drives an external N-channel MOSFET, offering a 20mV drop, reducing power dissipation by 90% compared to a Schottky diode, eliminating requirements for a costly heat sink.

The ultrafast transient response enables it to meet stringent automotive applications requiring AC input ripple rectification up to 100kHz. Additionally, its 20µA quiescent current while operating and 3.5µA in shutdown are ideal for always-on systems. The combination of the MSOP-10 package and external MOSFET ensures a compact solution footprint.

The LT8672’s solution offers the combination of 3V minimum input capability and a 20mV drop, enabling it to ease the minimum input voltage requirement during cold-crank and stop-start, providing simpler and more efficient circuits. If the input power source fails or is shorted, a very fast turn-off minimizes reverse current transients. Also, a power good pin signals when the external MOSFET is ready to take load current.

The LT8672EMS is packaged in an MSOP-10 package. An industrial temperature version, the LT8672IMS, is tested and guaranteed to operate from a –40°C to 125°C operating junction temperature. The LT8672HMS version is tested and guaranteed to operate from a –40°C to 150°C operating junction temperature.

Most popular news in Distribution & supply

Richardson Electronics & Fuji Electric sign distribution agreement
RS now stocking new series of high-efficiency fans and controllers
IoT expert SensaTek brings Clavister to Australia
LEM launches new website to enable efficient product info searches
Fastest Time-of-Flight sensor joins Rutronik range

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter






CPU choice for display based systems Rhett Evans | AndersDX
CPU choice for display based systems
Behind every display based system is the CPU which acts as the brain of the entire module creating the data that is presented as well as driving the I/O peripherals, display and touchscreen. There are many factors to consider when choosing the right CPU for your project, including whether you pick a complete Single Board Computer (SBC) or a stripped back core module (COM).

Forthcoming Events

    . . . . More Events









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy