01 Nov 2017

Industry 4.0 modem using LTE Cat M1 cellular technology

u‑blox has announcd that ercogener, a specialist in industrial modems, has developed its first Industry 4.0 modem using u‑blox LTE Cat M1 cellular technology.

The modem provides LTE Cat M1 cellular connectivity in EMEA – is designed to meet the requirements of the recently announced Orange LTE Cat M1 network, which will be launched across Europe in 2018.

LTE Cat M1 will be a key provider of connectivity in the Industry 4.0. Anticipating the launch of one of Europe’s first commercial LTE Cat M1 mobile networks, u‑blox and ercogener a member of Group Zekat, have been working with mobile network operator Orange to develop the first LTE Cat M1 cellular modem, providing connectivity and secure data transfer for a wide range of applications including asset trackers and fleet management systems.

“We are pleased to be working with u-blox and Orange. This partnership confirms our technological lead in IoT. In constant research on the industries of the future, we are proud to be the first manufacturer to introduce an industrialized and certified LTE-M solution. As such, ercogener affirms itself as the leader in geolocation, telemetering products, Industry 4.0,” comments Pascal Denoël, CEO of Group Zekat.

To develop the modem, ercogener and u‑blox were faced with the challenge of integrating a mobile technology that is in the early stages of test and deployment in EMEA. The modems, which operate on bands 3 and 20 conforming to requirements by Orange, have since been tested and approved by the mobile network operator.

“We are excited to collaborate with ercogener and Orange on the first deployment of LTE Cat M1 technology in Europe based on our compact SARA‑R4 LTE Cat M1 module,” says Simon Glassman, Senior Principal Strategic Partnerships, Product Center Cellular at u‑blox. “The module, which is used in the ercogener industrial modem, is configured to support global bands with a single hardware and includes a power-save mode and extended discontinuous reception that give it a battery life of up to 10 years."

The LTE Cat M1 industrial modem is only the latest in a series of ercogener products to feature u‑blox technology. Over the past years, u‑blox has provided ercogener with the 2G, 3G, and 4G technology to power several iterations of its industrial modems. Full pin-to-pin compatibility between these successive iterations of the u‑blox cellular modules all the way up the most recent LTE Cat M1 and NB‑IoT variants were crucial in enabling rapid integration and validation the led up to this success.

ercogener and u‑blox are pleased with the progress of this collaboration, and plan to expand their activities involving LTE Cat M1 in EMEA.

Most popular news in Cellular telecoms

5G New Radio data call with 4G and 5G dual connectivity in China
Ericsson Mobility Report released
National Instruments adopts AccelerComm's 5G NR polar IP
Seeed announces two IoT development boards using u-blox technology
Blockchain phone reference design offered to global smartphone brands

All news in this channel | All news


Share this page


Want more like this? Register for our newsletter






Next Generation Freight Transport Mark Patrick | mouser Electronics
Next Generation Freight Transport
As road freight transport levels continue to grow, concerns about the impact on the environment and human health come sharply into focus. Fossil fuel dependency makes it a leading source of greenhouse gas (GHG) emissions, but shifting freight to other transportation modes will prove challenging. Solutions that will improve the efficiency and performance of road freight transport are therefore essential to achieve defined environmental goals. In this blog, we will explore a potential solution that has been pioneered by Siemens - called eHighway. This combines the efficiency of electrified railways with the flexibility of trucks in order to form an innovative, next generation freight traffic system that is efficient, economical and environmentally friendly.









Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More explanation can be found in our Privacy Policy